
Springs
Springs & Hardware
Torsion springs come in left and right winds, and fitting the wrong hand is a common mistake on doors that were repaired in a hurry. We identify the correct spring for each side and wind them to matched tension.



Which one do I need?
- Since the cold snap the door has been stiff and noisy first thing, and after the last thaw the bottom corner began to judder.Garage Door Roller Replacement
- The roller at the top of the second panel is leaning outward and only half of the wheel is still in the track.Garage Door Hinge Replacement
- Halfway up, the door lurches and one roller rides onto the lip of the channel.Garage Door Track Repair or Replacement
- After years of slushy winters the cables look thinner near the bottom brackets, with rust streaks running down the door where they attach.Garage Door Cable Replacement
- One side of the door sits higher than the other in the tracks, and a lift cable is hanging slack or has jumped off its drum.Torsion Spring Replacement
- Open the door by hand and it drifts back down on its own, a little at first and then all at once.Extension Spring Replacement
Springs & Hardware
Counterbalance, track, roller, cable, and hinge work.







Garage Door Roller Replacement
Does the door hold its own weight?
With the opener released, the technician lifts the door to knee height and then to halfway and lets go. A balanced door stays where it is put; one that drifts down or climbs is telling you the springs are out of adjustment. This check comes before roller work for a practical reason: an unbalanced door leans on its rollers and hinges with weight the springs should be carrying, and new rollers fitted to such a door wear early.
If the balance is off, the technician explains what the spring system needs so you can decide whether to have it corrected in the same visit.
